Page4
Home ] Page1 ] Page2 ] Page3 ] [ Page4 ] Page5 ] Page6 ] Page7 ] Page8 ] Page9 ] Page10 ] Page11 ] Page12 ] Page13 ] Page14 ] Page15 ] Page16 ]

 

CA127 METAL RODS THREADED ONE END
8" metal rod with M2 thread, 20mm. long.

CA127/12 METAL RODS, as above but 12" overall length.

CA127/M3 200mm long, M3 thread.

CA127/S M2 stud 25mm long.

CA128 M2 NUTS
Suitable for use as lock-nuts for CA123, CA127.

CA128 M3 NUTS
Suitable for use as lock-nuts for CA123/M3, CA127/M3.

CA129 CONTROL HORN
Moulded in nylon with two integral threads, 6BA nuts and backing plate. Height approx. 22mm.

CA130 FLAT HINGE POLYPROPYLENE
Extremely flexible one piece moulded hinge, simple to use, better than Mylar and very economical. Length approx.25mm. Thickness approx. 1mm.

CA131 ROUND HINGE POLYPROPYLENE
Ideal for small models. Length approx. 30mm diameter approx.3mm.

CA132 TILLER ARM
Multi purpose accessory for boats, aircraft etc. where steering control is required, double arms with clamp action shaft fitting. Shaft Diameter 3/16"

CA133 STRIP AILERON HORN SET
Two to a set 6 1/4", 14SWG. rods set one end at 90 threaded with adjustable control horn to allow variable movement of control surface. Supplied with tubular bearings.

CA134 STRIP AILERON HORN SET
As above but 12SWG. Uses CA145 type hinges.

CA134LT STRIP AILERON HORN SET
Long aileron set with tube bearing.

CA134T STRIP AILERON HORN SET
Aileron set with tube bearing.

CA135 CONTROL HORN 14SWG. (CA133 Type)

CA136 CONTROL HORN 12SWG. (CA134 Type)